Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes            

Sections

1

  • LCD Screen
  • 7 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSamsung TL220

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Screen               
  • Begin with unscrewing the seven outer screws on the camera. There is one on each corner and then three at the bottom.

Begin with unscrewing the seven outer screws on the camera. There is one on each corner and then three at the bottom.

1024

Step 2

  • Now carefully pry open the back casing with the ifixit plastic opening tool.

Now carefully pry open the back casing with the ifixit plastic opening tool.

Step 3

  • When the back casing is off, gently move the LCD screen to the side.
  • And then remove the three inner screws to remove the inside case.

When the back casing is off, gently move the LCD screen to the side.

And then remove the three inner screws to remove the inside case.

Step 4

  • Unclip the four connectors that hold down the orange copper film strips.
  • Then carefully pull out the three film strips with the ifixit plastic opening tool.

Unclip the four connectors that hold down the orange copper film strips.

Then carefully pull out the three film strips with the ifixit plastic opening tool.

Step 5

  • Remove the screw located above the center film strip. This holds the top frame in place.

Remove the screw located above the center film strip. This holds the top frame in place.

Step 6

  • Unclip the four connectors to release the film strips.

Unclip the four connectors to release the film strips.

Step 7

  • Next unclamp the connector to release the film strip and then you can replace your LCD screen.

Next unclamp the connector to release the film strip and then you can replace your LCD screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Lesley                     

Member since: 03/03/2015

170 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       3 Tech Girls                        

                                                  Member of 3 Tech Girls 



                    Community                     


                                            2 Members                     


                                            4 Guides authored