Samsung Ubd Km85C Fan B Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Outer Shell
• 4 steps
• Fan B
• 3 steps

Flags

0

• BackSamsung UBD-KM85C

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Outer Shell               

• On the back side of the unit, remove the three 8.1mm screws marked with a Phillips #1 screwdriver.

On the back side of the unit, remove the three 8.1mm screws marked with a Phillips #1 screwdriver.

1024

Step 2

• From the back, lift the case upwards away from the unit then forwards, releasing the prongs on the front.

From the back, lift the case upwards away from the unit then forwards, releasing the prongs on the front.

Step 3

• There is one group of wires located towards the front of the case and attached directly to the motherboard and the case. Using two fingers in a pinching motion, release the wire from the clip and disconnect it.

There is one group of wires located towards the front of the case and attached directly to the motherboard and the case. Using two fingers in a pinching motion, release the wire from the clip and disconnect it.

Step 4

• Remove the cover from the device.

Remove the cover from the device.

Step 5

              Fan B               

• Using a #1 phillips head screwdriver, remove the two 8.1 mm screws in the corners of the fan.

Using a #1 phillips head screwdriver, remove the two 8.1 mm screws in the corners of the fan.

Step 6

• Use your fingers to pinch the white tip of the multicolored wire connecting the fan to the motherboard. While pinching, gently pull up to remove the wires from the motherboard.

Use your fingers to pinch the white tip of the multicolored wire connecting the fan to the motherboard. While pinching, gently pull up to remove the wires from the motherboard.

Step 7

• The fan is now free from its screws and wire and can be freely lifted out of the casing.

The fan is now free from its screws and wire and can be freely lifted out of the casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    James Edwards                     

Member since: 02/01/2018

627 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Baylor, Team S2-G1, Johnson Spring 2018                        

                                                  Member of Baylor, Team S2-G1, Johnson Spring 2018 



                    BU-JOHNSON-S18S2G1                     


                                            3 Members                     


                                            6 Guides authored