Samsung Washing Machine Wa80U3 Water Drain Pump Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          50 minutes            

Sections

1

• Water Drain Pump
• 10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSamsung Washing Machine WA80U3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Water Drain Pump               

• Drain any excess water preferably outside, using the cap on the side of the washing washine

Drain any excess water preferably outside, using the cap on the side of the washing washine

1024

Step 2

• Once drained, put the cap aside. Now flip the washing machine onto it’s front side

Once drained, put the cap aside. Now flip the washing machine onto it’s front side

Step 3

• Remove the rear cover

Remove the rear cover

Step 4

• Now remove the 2 screws where you took out the cap and the drain hose

Now remove the 2 screws where you took out the cap and the drain hose

Step 5

• Remove the 3 screws at the bottom of the washing machine where the drain hose was.

Remove the 3 screws at the bottom of the washing machine where the drain hose was.

Step 6

• Inside the washing machine there two hose connected to the drain pump assembly, remove them.

Inside the washing machine there two hose connected to the drain pump assembly, remove them.

Step 7

• Disconnect the two wires that give the drain pump power and unscrew the protective cover after this

Disconnect the two wires that give the drain pump power and unscrew the protective cover after this

Step 8

• Liberate the unit out by moving it to the left, up while lifting it out

Liberate the unit out by moving it to the left, up while lifting it out

Step 9

• Once you have the unit free, there are 3 screws connecting the pump to the other part of the drain pump assembly . unscrew the three screws

Once you have the unit free, there are 3 screws connecting the pump to the other part of the drain pump assembly . unscrew the three screws

Step 10

Now your pump is free. Replace the pump and put everything back together.

You have successfully replaced your drain pump

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Dave Davids                     

Member since: 07/02/2018

181 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Dave Davids - Feb 12, 2019

Reply

I’m Sorry For The Lack Of Pictures.