Samsung Wb1100F Camera Flash Replacement Repair Guide

Difficulty

Difficult

Steps

9

Time Required

                          30 minutes            

Sections

2

• LCD Screen Cover
• 2 steps
• Camera Flash
• 7 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackSamsung WB1100F

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen Cover               

• Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.
• Remove six 1.2 mm Phillips #00 screws from the side of the camera.

Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.

Remove six 1.2 mm Phillips #00 screws from the side of the camera.

1024

Step 2

• Use a plastic opening tool or spudger if available.
• Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

Use a plastic opening tool or spudger if available.

Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

Step 3

              Camera Flash               

• Remove four 1.2 mm Phillips #00 screws from the top panel.

Remove four 1.2 mm Phillips #00 screws from the top panel.

Step 4

• Using the flat end of a spudger, loosen the connection between the top panel and the device. Remove the top panel using your hands.

Using the flat end of a spudger, loosen the connection between the top panel and the device. Remove the top panel using your hands.

Step 5

• Remove four 1.2 mm Phillips #00 screws from the flash assembly

Remove four 1.2 mm Phillips #00 screws from the flash assembly

Step 6

• Using your hands, remove the flash assembly. This should not require much force.

Using your hands, remove the flash assembly. This should not require much force.

Step 7

• Using your hands, remove the top flash panel by pressuring down on the back to release a locking tab.

Using your hands, remove the top flash panel by pressuring down on the back to release a locking tab.

Step 8

• Desolder three wires on the flash assembly.

Desolder three wires on the flash assembly.

Step 9

• Gently remove the flash assembly from the body.

Gently remove the flash assembly from the body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Jesse Lindsey                     

Member since: 05/13/2016

581 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Metro State, Team 1-1, Carpenter SU 2016                        

                                                  Member of Metro State, Team 1-1, Carpenter SU 2016 



                    MSU-CARPENTER-SU16S1G1                     


                                            3 Members                     


                                            5 Guides authored