Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
1
- Battery Cover
- 4 steps
Flags
0
BackSamsung WB2200F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Cover
- Slide the battery cover door open by simultaneously twisting knob and pushing towards the direction of the arrow on the cover.
Slide the battery cover door open by simultaneously twisting knob and pushing towards the direction of the arrow on the cover.
1024
Step 2
- Remove battery by slightly tilting the camera. The battery should slide out.
Remove battery by slightly tilting the camera. The battery should slide out.
Step 3
- Looking at the inside of the battery door, remove the six 4mm screws using the screw driver with the JIS size 000 head.
Looking at the inside of the battery door, remove the six 4mm screws using the screw driver with the JIS size 000 head.
Step 4
- Lift the black tab above the knob.
- Remove any debris from behind knob or replace the knob.
Lift the black tab above the knob.
Remove any debris from behind knob or replace the knob.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Rachelle
Member since: 03/08/2016
213 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 5-4, Landers Spring 2016
Member of UMass Dartmouth, Team 5-4, Landers Spring 2016
UMASSD-LANDERS-S16S5G4
3 Members
12 Guides authored
