Samsung Wb2200F Record Button Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          15 minutes            

Sections

2

• Face-plate
• 3 steps
• Record Button
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung WB2200F

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Face-plate               

• Remove the 6mm screws located on the bottom and sides of the camera using the using the screw driver with the JIS size 000 head.

Remove the 6mm screws located on the bottom and sides of the camera using the using the screw driver with the JIS size 000 head.

1024

Step 2

• Remove the two 6mm screws located underneath the battery cover using the same screw driver with the JIS size 000 head.

Remove the two 6mm screws located underneath the battery cover using the same screw driver with the JIS size 000 head.

Step 3

• Carefully pry the face-plate away from the body of the camera, starting from the battery compartment. It should come off without too much trouble, although it may require force.
• Make sure to not damage any of the electronic components of the camera

Carefully pry the face-plate away from the body of the camera, starting from the battery compartment. It should come off without too much trouble, although it may require force.

Make sure to not damage any of the electronic components of the camera

Step 4

              Record Button               

• Open up the camera by removing the four 6 mm screws, that hold down the metal cover, using the screw driver with the JIS size 000 head.

Open up the camera by removing the four 6 mm screws, that hold down the metal cover, using the screw driver with the JIS size 000 head.

Step 5

• Gently lift off the metal cover.

Gently lift off the metal cover.

Step 6

• Clean out any dust or debris from the button interface.
• Replace faulty button.

Clean out any dust or debris from the button interface.

Replace faulty button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Rudolf Boampong                     

Member since: 03/04/2016

195 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       UMass Dartmouth, Team 5-4, Landers Spring 2016                        

                                                  Member of UMass Dartmouth, Team 5-4, Landers Spring 2016 



                    UMASSD-LANDERS-S16S5G4                     


                                            3 Members                     


                                            12 Guides authored