Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes

Sections

2

  • Rear Case
  • 3 steps
  • Flash Capacitor
  • 2 steps

Flags

0

  • BackSamsung WB35F

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.
  • Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.

Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

1024

Step 2

  • Using the spudger, and plastic opening tool open the casing of camera.

Using the spudger, and plastic opening tool open the casing of camera.

Step 3

  • Once you open the camera case, you will be able to work on any part of the camera.

Once you open the camera case, you will be able to work on any part of the camera.

Step 4

              Flash Capacitor
  • Caution: Touching the capacitor wires may cause serious injury. Use a capacitor discharge probe to safely rid the capacitors of dangerous charges.
  • Carefully take out the capacitor using the spudger.

Caution: Touching the capacitor wires may cause serious injury. Use a capacitor discharge probe to safely rid the capacitors of dangerous charges.

Carefully take out the capacitor using the spudger.

Step 5

  • Disconnect the wire from battery and replace the old battery with new battery.
  • Connect the wires to new battery and put the battery back in terminal.
  • Connect the positive wire to the positive terminal of the battery and negative wire to the the negative terminal of the battery.

Disconnect the wire from battery and replace the old battery with new battery.

Connect the wires to new battery and put the battery back in terminal.

Connect the positive wire to the positive terminal of the battery and negative wire to the the negative terminal of the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Sarmad Khan

Member since: 01/09/2015

525 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-6, Tanski Winter 2015                        

                                                  Member of USF Tampa, Team 1-6, Tanski Winter 2015 



                    USFT-TANSKI-W15S1G6                     


                                            4 Members                     


                                            10 Guides authored