Sanyo S1414 Lcd Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 30 minutes

Sections

LCD
3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackSanyo S1414
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

LCD

Remove the batteries and the memory card if so equipped.
Remove the two Phillips screws on the right.
Remove the four Phillips screws on the bottom.

Remove the batteries and the memory card if so equipped.

Remove the two Phillips screws on the right.

Remove the four Phillips screws on the bottom.

1024

Step 2

Remove the two screws on the left.
With all the screws removed, the case will split easy. No tool is required.
Front and back case come off at the same time. the silver midframe that houses the top buttons, remains on the camera.

Remove the two screws on the left.

With all the screws removed, the case will split easy. No tool is required.

Front and back case come off at the same time. the silver midframe that houses the top buttons, remains on the camera.

Step 3

The LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.
Fold the LCD way from the holder. Remove the four screws that secure the holder to the logic board.
With the LCD holder out of the way, you can now open the ribbon cable connector. Use your fingernails to flip the white clasp away from the ribbon cable side. This will disconnect the cable. Remove the LCD and replace with the new one.

The LCD ribbon cable is folded under the holder. Do not try to remove the LCD yet. It will tear the ribbon cable.

Fold the LCD way from the holder. Remove the four screws that secure the holder to the logic board.

With the LCD holder out of the way, you can now open the ribbon cable connector. Use your fingernails to flip the white clasp away from the ribbon cable side. This will disconnect the cable. Remove the LCD and replace with the new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    oldturkey03

Member since: 09/29/2010

722,317 Reputation

                                      109 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges

Team

                       Global Fixers                        

                                                  Member of Global Fixers 



                    Community                     


                                            22 Members                     


                                            240 Guides authored

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Member-Contributed Guide

Introduction

What you need

Team