Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
2
- Battery
- 4 steps
- Outer Casing
- 5 steps
Flags
1
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
BackSanyo VPC-T850
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.
Make sure the camera is powered off by pressing and holding the small, square button embedded in the top rim of the camera.
1024
Step 2
- Locate the hatch found on the bottom of the camera.
- Open the hatch by gripping the small notch and sliding it outwards.
Locate the hatch found on the bottom of the camera.
Open the hatch by gripping the small notch and sliding it outwards.
Step 3
- Push the small, plastic arm out of the way to free the battery.
- The battery is spring loaded and will pop out slightly when the arm is moved.
Push the small, plastic arm out of the way to free the battery.
The battery is spring loaded and will pop out slightly when the arm is moved.
Step 4
- Pull the battery out of the camera and close the hatch.
- To reinsert, there is a triangle on the battery indicating which direction to slide it in.
Pull the battery out of the camera and close the hatch.
To reinsert, there is a triangle on the battery indicating which direction to slide it in.
Step 5
Outer Casing
- Using your Phillips #000 Screwdriver, remove the eight screws located around the sides and bottom of the camera.
- Be sure to keep track of the side each screw comes from, as they come in different lengths.
Using your Phillips #000 Screwdriver, remove the eight screws located around the sides and bottom of the camera.
Be sure to keep track of the side each screw comes from, as they come in different lengths.
Step 6
- Orient the camera so the display is facing up.
- Gently pull off the rear panel surrounding the display.
- There are still three green wires connecting the panel to the rest of the camera.
- Use your prying tool if you have difficulties removing the panel by hand.
Orient the camera so the display is facing up.
Gently pull off the rear panel surrounding the display.
There are still three green wires connecting the panel to the rest of the camera.
Use your prying tool if you have difficulties removing the panel by hand.
Step 7
- Remove the eight black screws connecting the keypad circuit board to the rear panel.
Remove the eight black screws connecting the keypad circuit board to the rear panel.
Step 8
- With a plastic opening tool, gently remove the chrome framing on the left and right sides of the camera.
With a plastic opening tool, gently remove the chrome framing on the left and right sides of the camera.
Step 9
- Flip the camera over so the lens is facing up.
- Gently lift up the front panel to remove it from the rest of the camera.
- Use your plastic opening tool if you have difficulties removing the panel by hand.
Flip the camera over so the lens is facing up.
Gently lift up the front panel to remove it from the rest of the camera.
Use your plastic opening tool if you have difficulties removing the panel by hand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
James Robinson
Member since: 10/27/2015
459 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015
Member of UMass Dartmouth, Team 5-5, Gulbrandsen Fall 2015
UMASSD-GULBRANDSEN-F15S5G5
3 Members
10 Guides authored
