Difficulty

Easy

Steps

6

Time Required

                          15 minutes - 1 hour

Sections

1

  • Keys
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSECA 384 Digitale Baby Waage

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Warnung: das medizinische Gerät muss dafür auseinander genommen werden. Dabei erlischt Garantie und ggf. die Eichung!

When one of the Keys of the Device are stuck the scale probably isn’t usable anymore. A simple disassembly can mostly solve this problem

Warning: the medical device has to be disassembled. With that a warranty and any calibration certificates expire.

What you need

Step 1

              Keys
  • Press the unlock-button, slide the scale pan backwards and remove it.
  • Theoretically this step isn’t necessary, but it makes further steps way easier.

Press the unlock-button, slide the scale pan backwards and remove it.

Theoretically this step isn’t necessary, but it makes further steps way easier.

1024

Step 2

  • Turn the scale around.
  • Carefully remove the four Caps with a spudger or slotted screwdriver.
  • Probably you have to destroy the calibration stickers.

Turn the scale around.

Carefully remove the four Caps with a spudger or slotted screwdriver.

Probably you have to destroy the calibration stickers.

Step 3

  • Remove the four 9mm Phillips #2 screws and their washers.

Remove the four 9mm Phillips #2 screws and their washers.

Step 4

  • Lift the bottom plate up, move it to a side and lay it upside down on sie casing.
  • Be extra careful, so the cables of the battery compartment don’t get destroyed.

Lift the bottom plate up, move it to a side and lay it upside down on sie casing.

Be extra careful, so the cables of the battery compartment don’t get destroyed.

Step 5

  • Remove the four 10mm phillips #2 screws.
  • This screws have a pointed thread other that the main-casing screws. Don’t mix these up.
  • Then you can remove the controller-board.

Remove the four 10mm phillips #2 screws.

This screws have a pointed thread other that the main-casing screws. Don’t mix these up.

Then you can remove the controller-board.

Step 6

  • Check the faulty button for debris like sand or so.
  • Often just the disassembly and reassembly should solve it.
  • Check if the button can be pressed now.
  • Maybe use some lubricant on the buttons, so they glide through the holes.

Check the faulty button for debris like sand or so.

Often just the disassembly and reassembly should solve it.

Check if the button can be pressed now.

Maybe use some lubricant on the buttons, so they glide through the holes.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        TimedIn is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

TimedIn

Author

                                      with 1 other contributor 


                    TimedIn

Member since: 01/10/2020

816 Reputation

                                      3 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges