Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Case
  • 4 steps
  • Speakers
  • 3 steps

Flags

0

  • BackSega Game Gear

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Battery
  • Place your device upside down and locate the two battery compartments.

Place your device upside down and locate the two battery compartments.

1024

Step 2

  • Press on the tabs at the bottom of the battery covers then lift up to remove.
  • Remove batteries if they are present.

Press on the tabs at the bottom of the battery covers then lift up to remove.

Remove batteries if they are present.

Step 3

              Case
  • Remove the following screws:
  • Six Phillips screws
  • One 4.5 mm Gamebit screw

Remove the following screws:

Six Phillips screws

One 4.5 mm Gamebit screw

Step 4

  • Use tweezers to take all other screws out.

Use tweezers to take all other screws out.

Step 5

  • Gently open the case by unfolding it over the top of the Sega Game Gear.
  • Do not pull the back of the case away, as cables are connected between both sides.

Gently open the case by unfolding it over the top of the Sega Game Gear.

Do not pull the back of the case away, as cables are connected between both sides.

Step 6

  • Carefully unplug the 2 white-tipped connectors on the top cover.

Carefully unplug the 2 white-tipped connectors on the top cover.

Step 7

              Speakers
  • Unscrew the 8 Phillips screws from the logic board.

Unscrew the 8 Phillips screws from the logic board.

Step 8

  • Slide the logic board out from under the circular black fastener at the top-left corner of the case.

Slide the logic board out from under the circular black fastener at the top-left corner of the case.

Step 9

  • Removing the plastic holding the speaker to the case may permanently detach the speaker.
  • The plastic at these three locations is melted to the plastic. Pry off with caution.

Removing the plastic holding the speaker to the case may permanently detach the speaker.

The plastic at these three locations is melted to the plastic. Pry off with caution.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 9 other contributors 


                    Lauren Thurston

Member since: 04/15/2010

409 Reputation

                                      3 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Cal Poly, Team 28-33, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 28-33, Regan Spring 2010 



                    CPSU-REGAN-S10S28G33                     


                                            5 Members                     


                                            13 Guides authored