Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Sega Master System Model 2 Disassembly
- 4 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSega Master System II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
The Case
- Take out the 5 screws at the bottom
Take out the 5 screws at the bottom
1024
Step 2
RF Shield
- Remove the 5 screws (3 at the back and 2 on the front)
- Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)
- This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw
Remove the 5 screws (3 at the back and 2 on the front)
Remove the screw at the side (this screws is different then the other 5 so remember to put them away from the other 5 screws since they are similar)
This screw is for the rf shield under for the voltage regulator under this bigger rf shield, its not needed to remove that screw
Step 3
Cartridge Slot
- Remove the 2 screws thats holding the cartridge slot down
Remove the 2 screws thats holding the cartridge slot down
Step 4
The End
- Congratulations! You have opened your Sega Master System Model 2!
Congratulations! You have opened your Sega Master System Model 2!
To reassemble your device, follow these instructions in reverse order.
Screenshots taken from a video by Global Garage
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Krisow
Member since: 10/18/2017
568 Reputation
2 Guides authored
Badges:
12
+9 more badges
Owen Ready - Feb 3, 2019
Reply
This is in the wrong section.
Krisow - Feb 6, 2019
Nope, its in the Sega Master System area.