Difficulty
Moderate
Steps
5
Time Required
4 minutes
Sections
2
- Battery
- 3 steps
- Case
- 2 steps
Flags
0
BackSega Saturn
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Press on the plastic lever on the back of the Sega Saturn to pop open the battery slot.
Press on the plastic lever on the back of the Sega Saturn to pop open the battery slot.
1024
Step 2
- Push up the edge of the battery with the iFixit opening tool to get the battery out of its socket.
Push up the edge of the battery with the iFixit opening tool to get the battery out of its socket.
Step 3
- Use the ESD safe tweezers to pull the battery out of its slot.
Use the ESD safe tweezers to pull the battery out of its slot.
Step 4
Case
- Remove the five black 13.5mm JIS#1 screws on the bottom of the device. One might be hidden by a sticker.
Remove the five black 13.5mm JIS#1 screws on the bottom of the device. One might be hidden by a sticker.
Step 5
- Flip the device over so it rests right side up.
- Lift gently across the seam of the Sega Saturn. If parts get stuck, a light shake or prying with the iFixit opening tool should free it up. Do not use any brute force, as this can damage the case so it doesn’t close again.
Flip the device over so it rests right side up.
Lift gently across the seam of the Sega Saturn. If parts get stuck, a light shake or prying with the iFixit opening tool should free it up. Do not use any brute force, as this can damage the case so it doesn’t close again.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Jan Ulloa
Member since: 10/15/2019
602 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S1-G6, Leahy Fall 2019
Member of USF Tampa, Team S1-G6, Leahy Fall 2019
USFT-LEAHY-F19S1G6
3 Members
12 Guides authored