Segway Ninebot Max Battery Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          25 - 35 minutes            

Sections

1

• Battery
• 6 steps

Flags

0

• BackE-Scooter

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove the base plate               

• Flip the scooter upside down and unscrew the 18 screws holding the base plate using a Security Torx T15 screwdriver.

Flip the scooter upside down and unscrew the 18 screws holding the base plate using a Security Torx T15 screwdriver.

1024

Step 2

              Remove the old battery               

• Unscrew the 10 screws that hold the battery onto the frame and remove the battery from the enclosure.
• Unplug any connectors that connect the battery and scooter together.

Unscrew the 10 screws that hold the battery onto the frame and remove the battery from the enclosure.

Unplug any connectors that connect the battery and scooter together.

Step 3

              Place the new battery inside               

• Place the new battery inside the enclosure and reinstall the 10 screws (if needed), bonding the battery to the scooter.

Place the new battery inside the enclosure and reinstall the 10 screws (if needed), bonding the battery to the scooter.

Step 4

              Connect the battery               

• Connect the pins from the battery and scooter together.
• Make sure to tuck in the wiring.

Connect the pins from the battery and scooter together.

Make sure to tuck in the wiring.

Step 5

              Test the battery               

• Turn on the scooter and accelerate to make sure there are no errors and the scooter is running.

Turn on the scooter and accelerate to make sure there are no errors and the scooter is running.

Step 6

              Reattach the base plate               

• Line up the base plate and tighten it with all 18 screws using a Security Torx T15 Allen Key.

Line up the base plate and tighten it with all 18 screws using a Security Torx T15 Allen Key.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    sunny sanghera                     

Member since: 05/14/2021

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       York University, Team S1-G24, O'Regan Summer 2021                        

                                                  Member of York University, Team S1-G24, O'Regan Summer 2021 



                    YORK-O'REGAN-SU21S1G24                     


                                            1 Member                     


                                            2 Guides authored                     

Chip Bates - Jun 3, 2022

Reply

Do you know where I can purchase a replacement battery for the Ninebot Max? I can’t seem to find one.

Andrew Leslie - Jul 29, 2022

If you find a new battery will you put me onto it aswell I need one do you know how much they are thanks in advance

Jessica Loftis - Sep 20, 2022

Reply