Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes            

Sections

1

  • Battery
  • 5 steps

Flags

0

  • BackSennheiser HD 4.50

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Locate the side designation on the headband-earpiece junction.
  • The battery is on the left side.
  • The motherboard is on the right side.

Locate the side designation on the headband-earpiece junction.

The battery is on the left side.

The motherboard is on the right side.

1024

Step 2

  • Remove the ear pad from the left ear cup.
  • Refer to the Ear Pad Removal guide for more guidance.

Remove the ear pad from the left ear cup.

Refer to the Ear Pad Removal guide for more guidance.

Step 3

  • Use a Phillips #00 screwdriver to remove the four 10 mm screws holding the ear cup cover in place.
  • Use an opening tool to pry open the cover.
  • Remove the cover.

Use a Phillips #00 screwdriver to remove the four 10 mm screws holding the ear cup cover in place.

Use an opening tool to pry open the cover.

Remove the cover.

Step 4

  • Use a spudger to pry the battery from the plastic case.
  • The battery is held down by a strong adhesive, so it will give resistance.

Use a spudger to pry the battery from the plastic case.

The battery is held down by a strong adhesive, so it will give resistance.

Step 5

  • Using tweezers, pull the white battery connector upwards out of its socket.
  • Remove the battery.

Using tweezers, pull the white battery connector upwards out of its socket.

Remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Grace Singley                     

Member since: 02/19/2021

559 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Alabama, Team S2-G1, Bedsole Spring 2021                        

                                                  Member of University of Alabama, Team S2-G1, Bedsole Spring 2021 



                    UA-BEDSOLE-S21S2G1                     


                                            4 Members                     


                                            11 Guides authored                     

Fren6 - Aug 30, 2022

Reply

Hello ! Thanks for the tuto. Do you know where to buy the battery ?

Santanu Ghosal - Sep 11, 2022

Reply

You can search with the part number(Shown in the photo) : AHB622540N1/AHB622540N01.

M Lawson - Oct 28, 2022

Reply

Does anyone know if I can use the he 450 bt replacement battery in a 350 bt headphone? The difference in the spec is that the 450’s battery has a longer battery life (2.2 wh vs. 1.3 wh)