Difficulty

Easy

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Sew a Ladder Stitch
  • 5 steps

Flags

Worn Wear

Patagonia and iFixit are celebrating the stories we wear by collaborating to provide guides for Patagonia’s most popular apparel repairs.

  • BackPatagonia Basic Sewing

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The trick is to make the stitches as small and as even as possible. This technique works for repairing almost any type of tear.

What you need

Step 1

              Sew a Ladder Stitch
  • Thread your needle and tie a knot in the end.
  • We’re using contrasting thread for visibility, but when it comes time for your repair, you’ll want to use matching thread.
  • Drive the needle from the back of the material, just before where the tear starts.
  • Pull the thread taut.

Thread your needle and tie a knot in the end.

We’re using contrasting thread for visibility, but when it comes time for your repair, you’ll want to use matching thread.

Drive the needle from the back of the material, just before where the tear starts.

Pull the thread taut.

1024

Step 2

  • Take a small stitch, going in and out of the material, on one side of the tear only.
  • Pull the thread taut.

Take a small stitch, going in and out of the material, on one side of the tear only.

Step 3

  • Take a small stitch, going in and out of the material, on the other side of the tear, directly opposite of the stitch you just took.
  • Pull the thread taut. This should cinch the material together.
  • If your material bunches, try taking smaller stitches, while ensuring that you line up the stitches on either side of the material.

Take a small stitch, going in and out of the material, on the other side of the tear, directly opposite of the stitch you just took.

Pull the thread taut. This should cinch the material together.

If your material bunches, try taking smaller stitches, while ensuring that you line up the stitches on either side of the material.

Step 4

  • Continue stitching, switching from side to side as described in step 2 and 3 of this guide, pulling the thread taut after each stitch.
  • Stitch until you come to the end of the tear.

Continue stitching, switching from side to side as described in step 2 and 3 of this guide, pulling the thread taut after each stitch.

Stitch until you come to the end of the tear.

Step 5

  • One the last stitch, drive the needle through both sides of the fabric, taking as small of a stitch as possible.
  • Slowly pull the thread. As you pull, a loop will form. Draw the needle through this loop, and pull the thread taut.
  • Repeat this step, taking a tiny stitch, drawing the needle through the loop, and pulling taut.
  • Ensure that the stitches are tight, and cut any excess threads.

One the last stitch, drive the needle through both sides of the fabric, taking as small of a stitch as possible.

Slowly pull the thread. As you pull, a loop will form. Draw the needle through this loop, and pull the thread taut.

Repeat this step, taking a tiny stitch, drawing the needle through the loop, and pulling taut.

Ensure that the stitches are tight, and cut any excess threads.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Brittany McCrigler

Member since: 03/05/2012

87,796 Reputation

                                      132 Guides authored                  



                       Badges:
                       48







                                                        +45 more badges