Shark Flex Duoclean Power Cord Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

2

• Dust Cup
• 1 step
• Power Cord
• 4 steps

Flags

0

• BackShark Flex DuoClean

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Dust Cup               

• Squeeze Dust Cup release buttons on either side of the component.
• Pull up to release Dust Cup.

Squeeze Dust Cup release buttons on either side of the component.

Pull up to release Dust Cup.

1024

Step 2

              Power Cord               

• Remove the pre-motor filter with your hands.

Remove the pre-motor filter with your hands.

Step 3

• Remove the post-motor filter.

Remove the post-motor filter.

Step 4

• Remove the two 15 mm screws by twisting counterclockwise with the T10 Torx screwdriver.

Remove the two 15 mm screws by twisting counterclockwise with the T10 Torx screwdriver.

Step 5

• Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.
• To fully remove the power cord, cut the wires using a wire cutter.
• For reassembly, use the soldering guide in the Introduction.

Remove the two 12 mm screws by twisting counterclockwise with the T15 Torx screwdriver.

To fully remove the power cord, cut the wires using a wire cutter.

For reassembly, use the soldering guide in the Introduction.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    caoimhe                     

Member since: 10/08/2018

889 Reputation

                                      4 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       Cal Poly, Team S17-G5, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G5, White Fall 2018 



                    CPSU-WHITE-F18S17G5                     


                                            4 Members                     


                                            14 Guides authored                     

qwazew - Jan 9, 2023

Reply

I found with further dissasembly, uncrimping and recrimping the wiring loom saved having to add more connections.