Shark Flex Duoclean Suction Motor Replacement Repair Guide

Difficulty

Difficult

Steps

8

Time Required

                          15 minutes            

Sections

2

• Dust Cup
• 1 step
• Suction Motor
• 7 steps

Flags

0

• BackShark Flex DuoClean

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Dust Cup               

• Squeeze Dust Cup release buttons on either side of the component.
• Pull up to release Dust Cup.

Squeeze Dust Cup release buttons on either side of the component.

Pull up to release Dust Cup.

1024

Step 2

              Suction Motor               

• Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

Step 3

• Use the iFixit opening tool to remove the top component.

Use the iFixit opening tool to remove the top component.

Step 4

• Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

Remove the two 15mm screws by twisting counterclockwise using the T10 Torx screwdriver.

Step 5

• Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

Remove the two 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.

Step 6

• Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

Remove the two 15 mm screws holding the motor cover by twisting counterclockwise with a T10 Torx screwdriver.

Step 7

• Cut the zip ties holding the motor using the wire cutter.

Cut the zip ties holding the motor using the wire cutter.

Step 8

• Cut the wires using the wire cutters to completely remove the motor.
• For reassembly, use the soldering guide in the Introduction.

Cut the wires using the wire cutters to completely remove the motor.

For reassembly, use the soldering guide in the Introduction.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Christian Fuller                     

Member since: 10/08/2018

411 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team S17-G5, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G5, White Fall 2018 



                    CPSU-WHITE-F18S17G5                     


                                            4 Members                     


                                            14 Guides authored                     

andrea - Feb 4, 2021

Reply

how i need to know how to re connect the wires on replacing a new motor, my model is similar HV321.