Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackShark ION Robot S87
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device so its underside is facing up.
- Use the Phillips #1 screwdriver to remove the two 14mm screws.
- Once you have removed the screws, open the battery lid.
Flip the device so its underside is facing up.
Use the Phillips #1 screwdriver to remove the two 14mm screws.
Once you have removed the screws, open the battery lid.
1024
Step 2
- Hold both sides of the battery using the plastic tabs.
- Use the plastic tabs to pull the battery out.
Hold both sides of the battery using the plastic tabs.
Use the plastic tabs to pull the battery out.
Step 3
- Disconnect the battery from the device by pulling it out of the circuit.
Disconnect the battery from the device by pulling it out of the circuit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Adeel Ahmad
Member since: 01/14/2020
232 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
York University, Team S1-G7, Woodhouse Winter 2020
Member of York University, Team S1-G7, Woodhouse Winter 2020
YORK-WOODHOUSE-W20S1G7
3 Members
12 Guides authored
