Difficulty

Very easy

Steps

2

Time Required

                          2 minutes            

Sections

1

  • Battery
  • 2 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackShark IQ AV993

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Unscrew the two 14 mm screws on the battery panel using a Phillips #1 screwdriver.

Unscrew the two 14 mm screws on the battery panel using a Phillips #1 screwdriver.

1024

Step 2

  • Gently pull the white tabs on the battery straight upward.
  • There is a clip inserted into a plastic housing via wiring. Disconnect the battery by pressing in the clip.
  • Don’t pull up on the battery too hard as a wire connects to the robot. Don’t want to damage the wire here.
  • Remove the battery from the device.

Gently pull the white tabs on the battery straight upward.

There is a clip inserted into a plastic housing via wiring. Disconnect the battery by pressing in the clip.

Don’t pull up on the battery too hard as a wire connects to the robot. Don’t want to damage the wire here.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kyle Rhines                     

Member since: 10/26/2022

504 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team 3-3, Botvin Fall 2022                        

                                                  Member of UMass Dartmouth, Team 3-3, Botvin Fall 2022 



                    UMASSD-BOTVIN-F22S3G3                     


                                            3 Members                     


                                            6 Guides authored