Shark Navigator Freestyle Sv1106 Roller Brush Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          4 minutes            

Sections

1

• Roller Brush
• 3 steps

Flags

0

• BackShark Navigator Freestyle

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Roller Brush               

• Remove the black rubber band from the roller brush
• In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

Remove the black rubber band from the roller brush

In most models there will be a plastic cover over the rubber band. You will use the quarter to twist the latch and take off the cover

1024

Step 2

• Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

Use the bristles to pull the end of the brush that was connected to the belt away from the vacuum.

Step 3

• Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

Slide the roller belt off of the roller brush and pull the roller away from the motorized brush.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Zachary Liu                     

Member since: 01/24/2018

604 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S1-G5, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S1-G5, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S1G5                     


                                            3 Members                     


                                            10 Guides authored                     

ellenmccarthycalif - Jun 6, 2018

Reply

but where can I buy the brush for model SV1106?

Ken Codeglia - Sep 11, 2020

Reply

Replace the brush? They are not available for purchase.

isaac.a.brown - Nov 26, 2021

Reply

If only you could buy a brush besides second hand on eBay…