Difficulty
Very easy
Steps
2
Time Required
20 seconds
Sections
1
- HEPA Filter
- 2 steps
Flags
0
BackShark Navigator Lift-Away Deluxe NV360
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
HEPA Filter
- Press the latch below the HEPA filter on the bottom of the front body of the vacuum and pull outwards with your hands.
- Pull the grey and blue plastic cover down and away with your hands.
Press the latch below the HEPA filter on the bottom of the front body of the vacuum and pull outwards with your hands.
Pull the grey and blue plastic cover down and away with your hands.
1024
Step 2
- Pull the HEPA filter out by the grey plastic tab in the middle of the grate with your hands.
- Wiggle it around as you are pulling if the HEPA filter is not coming out easily.
Pull the HEPA filter out by the grey plastic tab in the middle of the grate with your hands.
Wiggle it around as you are pulling if the HEPA filter is not coming out easily.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Elena Postupalskaya
Member since: 10/02/2017
1,039 Reputation
6 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team S15-G2, Livingston Fall 2017
Member of Cal Poly, Team S15-G2, Livingston Fall 2017
CPSU-LIVINGSTON-F17S15G2
3 Members
14 Guides authored
Kelly Kusemamuriwo - Oct 29, 2022
Reply
I bought two different HEPA filters for the front, and they just blow off. What is the part with the tab that you push down to get the filter out? Is that an extra part cuz I don’t even have that.