Difficulty
Moderate
Steps
4
Time Required
2 minutes
Sections
1
- Dust Cup
- 4 steps
Flags
0
BackShark Navigator
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Dust Cup
- Press down on the black, rubber ballish button located on the top of the vacuum.
- Pull back simultaneous on the plastic handle and remove the dust container.
Press down on the black, rubber ballish button located on the top of the vacuum.
Pull back simultaneous on the plastic handle and remove the dust container.
1024
Step 2
- Press the plastic tab in, located on the front of the dust container.
- Pull up simultaneously on the plastic handle.
Press the plastic tab in, located on the front of the dust container.
Pull up simultaneously on the plastic handle.
Step 3
- Remove the dust cup from the inside of the dust container.
Remove the dust cup from the inside of the dust container.
Step 4
- Push in the red tab located on the side of the dust cup.
- Open the dust cup simultaneously with the cone-half pointing downwards.
- Separate the two halves.
Push in the red tab located on the side of the dust cup.
Open the dust cup simultaneously with the cone-half pointing downwards.
Separate the two halves.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kahye Yu
Member since: 10/02/2017
426 Reputation
2 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team S4-G6, Livingston Fall 2017
Member of Cal Poly, Team S4-G6, Livingston Fall 2017
CPSU-LIVINGSTON-F17S4G6
3 Members
12 Guides authored
