Shark Pet Perfect Ii Front Belt Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          8 minutes            

Sections

1

• Front Belt
• 4 steps

Flags

0

• BackShark Pet Perfect II

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Belt               

• Remove the motorized brush from the dust cup by pulling it apart.

Remove the motorized brush from the dust cup by pulling it apart.

1024

Step 2

• Use a Phillips #1 screwdriver to remove the five 14mm screws from the face of the motorized brush.

Use a Phillips #1 screwdriver to remove the five 14mm screws from the face of the motorized brush.

Step 3

• Separate the motorized brush face plate by using a flat prying tool.

Separate the motorized brush face plate by using a flat prying tool.

Step 4

• Remove the brush roller by lifting vertically away from the brush head. It should come out easily along with the belt.
• Be careful in handling the belt. If stretched or damaged, the belt can cause the motorized brush to operate incorrectly.

Remove the brush roller by lifting vertically away from the brush head. It should come out easily along with the belt.

Be careful in handling the belt. If stretched or damaged, the belt can cause the motorized brush to operate incorrectly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Attached Documents

• manual-SV780.pdf
• PDF - 384.59 kb
• View

manual-SV780.pdf

PDF - 384.59 kb

Author

                                      with 2 other contributors 

                    Tanner Brown                     

Member since: 06/27/2017

431 Reputation

                                      3 Guides authored                  



                       Badges:
                       7





                                                        +4 more badges                           

Team

                       UW Tacoma, Team S1-G5, Liner Summer 2017                        

                                                  Member of UW Tacoma, Team S1-G5, Liner Summer 2017 



                    UWT-LINER-SU17S1G5                     


                                            4 Members                     


                                            8 Guides authored                     

Aaron Woods - Aug 4, 2021

Reply

Thank you for this! I needed the picture to put it back together after I cleaned it out because it was not spinning. Working perfectly now! I also have an extra new battery if anyone needs it. :)