Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
3
- Dust Cup
- 2 steps
- Filter Grille
- 2 steps
- Post-Motor Filter
- 1 step
Flags
0
BackShark Rocket Powerhead AH401
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Dust Cup
- Ensure the device is turned off and unplugged from any power source before beginning work.
- Push down on the dust can lever to release the dust can in order to get to the filter grill.
Ensure the device is turned off and unplugged from any power source before beginning work.
Push down on the dust can lever to release the dust can in order to get to the filter grill.
1024
Step 2
- Remove the dust cup by lifting it off the dock.
Remove the dust cup by lifting it off the dock.
Step 3
Filter Grille
- Push inward on the top of the filter grille where it says “Push.”
- Lift the filter grille upward.
Push inward on the top of the filter grille where it says “Push.”
Lift the filter grille upward.
Step 4
- Lift gently and pull the grille up towards you until it releases.
- The post-motor filter is underneath the filter grille.
Lift gently and pull the grille up towards you until it releases.
The post-motor filter is underneath the filter grille.
Step 5
Post-Motor Filter
- Remove the filter by pulling it out and away from the device with your hand.
Remove the filter by pulling it out and away from the device with your hand.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Shobhit Dabral
Member since: 01/24/2018
901 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team S19-G3, Livingston Winter 2018
Member of Cal Poly, Team S19-G3, Livingston Winter 2018
CPSU-LIVINGSTON-W18S19G3
4 Members
18 Guides authored
