Shark Rocket Professional Secondary Filters Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          2 minutes

Sections

Dust Cup
2 steps
Secondary Filters
4 steps

Flags

BackShark Rocket Professional
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Dust Cup

First, locate the button that says “Dust Cup”. It is right next to the power button at the base of the handle.
Press the button down completely; you should feel a click.

First, locate the button that says “Dust Cup”. It is right next to the power button at the base of the handle.

Press the button down completely; you should feel a click.

1024

Step 2

Grab the handle of the dust cup, then pull up and away from the vacuum.
You must press the button and pull the dust cap simultaneously at first to release the latch.

Grab the handle of the dust cup, then pull up and away from the vacuum.

You must press the button and pull the dust cap simultaneously at first to release the latch.

Step 3

              Secondary Filters

As you look beneath the base of the dust cup, you will see a white foam filter. Remove this filter with your fingers.

As you look beneath the base of the dust cup, you will see a white foam filter. Remove this filter with your fingers.

Step 4

Removing the first filter will reveal a second, thicker foam filter. Remove this as well.
Shark recommends that you rinse and air dry these filters monthly.
Remember to replace the filters in the correct order.

Removing the first filter will reveal a second, thicker foam filter. Remove this as well.

Shark recommends that you rinse and air dry these filters monthly.

Remember to replace the filters in the correct order.

Step 5

A dust filter is located within the dust cup. To access it, open the dust cup by pressing the orange tab on the front and pulling up on the handle.

A dust filter is located within the dust cup. To access it, open the dust cup by pressing the orange tab on the front and pulling up on the handle.

Step 6

Find the cylindrical screen in the center of the dust cap, grab the top, and pull it straight out.
If this filter is dirty, shake it or rinse it off to clean it.

Find the cylindrical screen in the center of the dust cap, grab the top, and pull it straight out.

If this filter is dirty, shake it or rinse it off to clean it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Theo Watkins

Member since: 01/23/2018

356 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S18-G6, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S18-G6, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S18G6                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

Team#

Introduction

Team