Shark Vacuum Pet Hair Power Brush Roller Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes            

Sections

1

• Pet Hair Power Brush Roller Brush
• 5 steps

Flags

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

• BackVacuum Cleaner

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Pet Hair Power Brush Roller Brush               

• This Shark model brush head consists of 7 parts: a base frame, a gear, a roller brush, two side screws, a plastic round band, and a top frame of the head.
• Push the grey button on the back panel to open up the brush head.

This Shark model brush head consists of 7 parts: a base frame, a gear, a roller brush, two side screws, a plastic round band, and a top frame of the head.

Push the grey button on the back panel to open up the brush head.

1024

Step 2

• Take the purple gear out of the brush head body.

Take the purple gear out of the brush head body.

Step 3

• Pull out the roller brush from the brush head.
• Take out the black plastic band.
• The black band is an important component and will be needed for reassembly so keep it carefully.

Pull out the roller brush from the brush head.

Take out the black plastic band.

The black band is an important component and will be needed for reassembly so keep it carefully.

Step 4

• Pull out the side screws from the right and left side of the roller brush.
• There are two screws, one on each side.

Pull out the side screws from the right and left side of the roller brush.

There are two screws, one on each side.

Step 5

• Take the new roller brush and fit the two grey screws/fittings on either side of the roller brush until they are secure.

Take the new roller brush and fit the two grey screws/fittings on either side of the roller brush until they are secure.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Roshni Sachar                     

Member since: 03/19/2016

232 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Michigan Tech, Team 1-23, Lauer Spring 2016                        

                                                  Member of Michigan Tech, Team 1-23, Lauer Spring 2016 



                    MTU-LAUER-S16S1G23                     


                                            1 Member                     


                                            1 Guide authored                     

hvabrams - Feb 22, 2017

Reply

Cat hair will jam up in the small gap between the gear and the bushing on the turbine and will cause enough friction to stop the turbine. I used a needle to dig out the hair and it solved the problem.

Wendy Dean - Jan 25, 2022

Great tip! It works now! TY!

tigersfoot - Sep 4, 2019

Reply

very clear and concise. took me 5 minutes with your instructions - couldn’t find anything like this on the shark site.

paolodigiacomo23 - Apr 19, 2020

Reply

I need to put back all parts , don’t know where to start, can u explain step by step how to put them back please . Thank you

Renee Mills - Aug 10, 2020

Reply

Where can I purchase one of the side screw/fittings?