Difficulty
Moderate
Steps
7
Time Required
10 minutes
Sections
1
- Keyboard
- 7 steps
Flags
2
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
BackSharp PC-MM20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- First, remove the battery from your laptop and make sure it is powered down.
First, remove the battery from your laptop and make sure it is powered down.
1024
Step 2
- Close your laptop
- Turn your laptop so that the back of it is facing you.
- You should notice three screw. Remove those screws using the proper screw driver.
- Be sure to put them somewhere safe, like a magnetic pad for instance.
Close your laptop
Turn your laptop so that the back of it is facing you.
You should notice three screw. Remove those screws using the proper screw driver.
Be sure to put them somewhere safe, like a magnetic pad for instance.
Step 3
- Now, we’re going to flip the laptop so it is upside down.
- Remove the screws shown in the picture as well.
Now, we’re going to flip the laptop so it is upside down.
Remove the screws shown in the picture as well.
Step 4
- Next, open the laptop and focus on the front of the base of the laptop.
- Notice that there are small notches in between the two plates of the laptop
- Take a flat edge and wedge it into the slot, and pop it open. There should be several of these slots on the front side of the laptop.
Next, open the laptop and focus on the front of the base of the laptop.
Notice that there are small notches in between the two plates of the laptop
Take a flat edge and wedge it into the slot, and pop it open. There should be several of these slots on the front side of the laptop.
Step 5
- Once the cover is loose, you should be able to wiggle it somewhat freely. However, there are a few connections holding it together.
- Next, we’re going to use tweezers to delicately remove the flat cable connecting the key board to the laptop.
- Also, remove the flat cable from the track pad to the laptop.
Once the cover is loose, you should be able to wiggle it somewhat freely. However, there are a few connections holding it together.
Next, we’re going to use tweezers to delicately remove the flat cable connecting the key board to the laptop.
Also, remove the flat cable from the track pad to the laptop.
Step 6
- Now that all connections are undone, you should be able to easily remove the top of the base from the rest of the computer.
Now that all connections are undone, you should be able to easily remove the top of the base from the rest of the computer.
Step 7
- Next, you can take the key board out of its housing, and replace it with your new key board!
Next, you can take the key board out of its housing, and replace it with your new key board!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Logan Lindsey
Member since: 09/11/2013
101 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Oakland University, Team 1-1, Ruszkiewicz Fall 2012
Member of Oakland University, Team 1-1, Ruszkiewicz Fall 2012
OAK-RUSZKIEWICZ-F12S1G1
1 Member
2 Guides authored
