Difficulty
Easy
Steps
6
Time Required
15 minutes
Sections
2
- Power Unit Assembly
- 4 steps
- Power Switch
- 2 steps
Flags
0
BackShop-Vac MC150A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unlatch the power unit assembly
- Before you begin, make sure to switch off the device and unplug it from the outlet.
- Unlatch the two side clips securing the power unit assembly to the tank.
- Remove the power unit assembly from the tank assembly.
Before you begin, make sure to switch off the device and unplug it from the outlet.
Unlatch the two side clips securing the power unit assembly to the tank.
Remove the power unit assembly from the tank assembly.
1024
Step 2
Remove the top cover
- Use a 3.5 mm hex key to remove the three screws securing the top cover.
- Remove the top cover.
Use a 3.5 mm hex key to remove the three screws securing the top cover.
Remove the top cover.
Step 3
- Use a 3.5 mm hex key to remove the four screws securing the power unit assembly.
Use a 3.5 mm hex key to remove the four screws securing the power unit assembly.
Step 4
- Separate the power unit assembly from the cover.
Separate the power unit assembly from the cover.
Step 5
Disconnect the switch
- Pull out and disconnect the four spade connectors from the switch module.
- During reassembly, use the last image as a reference for how to connect the wires.
Pull out and disconnect the four spade connectors from the switch module.
During reassembly, use the last image as a reference for how to connect the wires.
Step 6
- Use a spudger to pry up and remove the red switch from the housing.
Use a spudger to pry up and remove the red switch from the housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 3 other contributors
Ngunlian
Member since: 02/08/2016
700 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
IUPUI, Team 1-2, Baechle Spring 2016
Member of IUPUI, Team 1-2, Baechle Spring 2016
IUPUI-BAECHLE-S16S1G2
5 Members
10 Guides authored
