Difficulty
Difficult
Steps
5
Time Required
30 minutes
Sections
2
- Battery
- 4 steps
- Motherboard
- 1 step
Flags
0
BackShowerDoorDirect Shower Speaker
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the suction pad by pulling the suction out of the slot that it is in.
Remove the suction pad by pulling the suction out of the slot that it is in.
1024
Step 2
- Remove the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.
- Pull apart the two halves.
Remove the four 9.09mm Philips #1 screws that hold the 2 pieces of the cover together.
Pull apart the two halves.
Step 3
- Hold the base and pull up on the battery.
Hold the base and pull up on the battery.
Step 4
- Remove the four 5mm Phillips #1 screws from the motherboard.
- Desolder the two wires connecting the battery tp the motherboard.
Remove the four 5mm Phillips #1 screws from the motherboard.
Desolder the two wires connecting the battery tp the motherboard.
Step 5
Motherboard
- Desolder the four remaining wires that are connected to the motherboard.
Desolder the four remaining wires that are connected to the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matthew Dunkle
Member since: 05/21/2018
203 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S1-G1, Harley Spring 2018
Member of IUPUI, Team S1-G1, Harley Spring 2018
IUPUI-HARLEY-S18S1G1
7 Members
6 Guides authored
