Difficulty
Moderate
Steps
3
Time Required
5 minutes
Sections
1
- Faceplate
- 3 steps
Flags
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackShure SM58
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Faceplate
- Remove the yellow and green wires from the face plate.
- Note which side the yellow and green wires connect to.
Remove the yellow and green wires from the face plate.
Note which side the yellow and green wires connect to.
1024
Step 2
- Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable.
- Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.
Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable.
Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.
Step 3
- Slide the face plate over the connector.
Slide the face plate over the connector.
Follow the steps of the guide in reverse to reassemble the microphone. In order to solder wires back to faceplate use soldering guide.
Cancel: I did not complete this guide.
Author
with 6 other contributors
nat coll
Member since: 09/27/2012
609 Reputation
14 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 7-53, Forte Fall 2012
Member of Cal Poly, Team 7-53, Forte Fall 2012
CPSU-FORTE-F12S7G53
5 Members
18 Guides authored