Side Panel Removal Repair Guide

Difficulty

Very easy

Steps

2

Time Required

                          30 seconds            

Sections

1

• Side Panel Removal
• 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHP Pavilion p6

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Side Panel Removal               

• Before you start make sure that all of the leads have been disconnected from the computer.
• It is strongly recomended to wait at least 15 minutes after turning it off to allow the computer and internal components to cool down.
• It is recomended to lay the computer down with the pull tab at the top to allow it to be easily opened.
• It is also worth mentioning at this point that for complete safety when working inside the computer that wearing an anti-static band and touching a grounded metal object before starting is good practice.

Before you start make sure that all of the leads have been disconnected from the computer.

It is strongly recomended to wait at least 15 minutes after turning it off to allow the computer and internal components to cool down.

It is recomended to lay the computer down with the pull tab at the top to allow it to be easily opened.

It is also worth mentioning at this point that for complete safety when working inside the computer that wearing an anti-static band and touching a grounded metal object before starting is good practice.

1024

Step 2

• In order to remove the side panel a single screw needs to first be removed.
• The side panel can then be pulled towards the back of the computer using the pull tab provided.
• The panel then needs to be rotated as showen in order to remove it from the computer.

In order to remove the side panel a single screw needs to first be removed.

The side panel can then be pulled towards the back of the computer using the pull tab provided.

The panel then needs to be rotated as showen in order to remove it from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Oli                     

Member since: 01/03/2014

1,196 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges