Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Outer Casing
  • 5 steps
  • Thumbwheel
  • 2 steps

Flags

0

  • BackSidekick II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Casing
  • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
  • Gently pry open button and remove button.
  • Do this for each of the 3 buttons remaining.

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

Gently pry open button and remove button.

Do this for each of the 3 buttons remaining.

1024

Step 2

  • The bumpers on the top and bottom of the phone can be removed by simply “peeling” them off.

The bumpers on the top and bottom of the phone can be removed by simply “peeling” them off.

Step 3

  • Use the T6 Torx Screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Use the T6 Torx Screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Step 4

  • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
  • Use the Torx 6 screwdriver to remove these 2 screws.
  • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

Use the Torx 6 screwdriver to remove these 2 screws.

Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Step 5

  • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
  • You can use your hands to simply pull apart the top casing from the bottom casing.

After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

You can use your hands to simply pull apart the top casing from the bottom casing.

Step 6

              Thumbwheel
  • Remove 2 screws using the Torx 6 screwdriver.

Remove 2 screws using the Torx 6 screwdriver.

Step 7

  • The thumbwheel and casing will be loose, gently remove it.

The thumbwheel and casing will be loose, gently remove it.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    michael albaum

Member since: 01/20/2010

87 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 3-19, Maness Winter 2010                        

                                                  Member of Cal Poly, Team 3-19, Maness Winter 2010 



                    CPSU-MANESS-W10S3G19                     


                                            4 Members                     


                                            11 Guides authored