Difficulty
Very easy
Steps
2
Time Required
2 minutes
Sections
1
- Coffee spout cleaning
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSiemens EQ.5
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This tutorial shows how to remove it and clean it manually without any problems.
What you need
Step 1
Coffee spout cleaning
- First, turn off the coffee maker and unplug the power cord.
- Now slide the spudger/screwdriver between the plastic cap and the cover and lever slightly in the direction of the coffee machine. This pushes the cover over the barb.
- Grasp the cover at the sides and pull it upwards. This is often very difficult, so pull hard but not excessively.
First, turn off the coffee maker and unplug the power cord.
Now slide the spudger/screwdriver between the plastic cap and the cover and lever slightly in the direction of the coffee machine. This pushes the cover over the barb.
Grasp the cover at the sides and pull it upwards. This is often very difficult, so pull hard but not excessively.
1024
Step 2
- Tilt the spout forward and lift it upward.
- Pull off the hose and the outlet is free.
- When assembling, note that the sleeve can get caught on the spout. Therefore, press the spout in when pushing the sleeve down.
Tilt the spout forward and lift it upward.
Pull off the hose and the outlet is free.
When assembling, note that the sleeve can get caught on the spout. Therefore, press the spout in when pushing the sleeve down.
Work through the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
shingle is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
shingle
Author
with 2 other contributors
Dominic Ritter
Member since: 01/07/2020
85 Reputation
1 Guide authored
Badges:
3
