Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Condensation Water Pump/Floater replacement
- 4 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSiemens Siwatherm 7400 Series IQ
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Condensation Water Pump/Floater replacement
- After removing the side cover (if you are standing in front of it on the right) the motor of the drum becomes visible. The pump of the condensation water tank and the float are located directly underneath. The drive tensioner must be loosened for removal/exchange.
After removing the side cover (if you are standing in front of it on the right) the motor of the drum becomes visible. The pump of the condensation water tank and the float are located directly underneath. The drive tensioner must be loosened for removal/exchange.
1024
Step 2
Remove Placeholder next to the motor
- Remove all plugs from the drive (not shown in the picture!) and remove the placeholder. Unlock the lock with your thumb.
Remove all plugs from the drive (not shown in the picture!) and remove the placeholder. Unlock the lock with your thumb.
Step 3
Disconnecting pump and float
- Remove the cable from the float and the pump and pull off the hose at the back. The motor can be folded upwards.
Remove the cable from the float and the pump and pull off the hose at the back. The motor can be folded upwards.
Step 4
Removing pump and float
- Once the cover is removed, the pump and float can be easily removed.
- In this step, the tank should be cleaned to prevent the pump from clogging up quickly.
- The rear part of the container can be reached from the other side. Remove the left side panel and pull out the condenser to the front.
Once the cover is removed, the pump and float can be easily removed.
In this step, the tank should be cleaned to prevent the pump from clogging up quickly.
The rear part of the container can be reached from the other side. Remove the left side panel and pull out the condenser to the front.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Jasper Fleischhauer
Martin Kubica
Fabio Heide
Author
with 2 other contributors
Newbe
Member since: 02/14/2015
58 Reputation
1 Guide authored
Badges:
4
+1 more badge
wodipo - Apr 11, 2022
Reply
Danke vielmals für die Hilfestellung. Ohne das Entfernen der Motorhalterung hatte ich die Abdeckung zunächst nicht rausbekommen. Das Hauptproblem war aber dies. Siehe mein Beitrag :
