Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Siemens Surpresso - Bosch Benvenuto Brew Group Removal
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSiemens Surpresso - Bosch Benvenuto
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Siemens Surpresso - Bosch Benvenuto Brew Group Removal
- Never forget: Pull the power plug!
- Remove all attachments such as water reservoir, coffee compartment lid, trester drawer.
- Remove all coffee beans from the bean hopper.
- Open the side flap.
Never forget: Pull the power plug!
Remove all attachments such as water reservoir, coffee compartment lid, trester drawer.
Remove all coffee beans from the bean hopper.
Open the side flap.
1024
Step 2
- Loosen the three rubber caps on the brew group.
- Using a strong flat-blade screwdriver, adjust the three plastic slots underneath so that the “unlocked” position is indicated.
- Note: with the newer version of the brew group, only one lever needs to be flipped.
- Pull out the brew group. If it is stuck, pull firmly and evenly, but with feeling, preferably at the bottom right.
Loosen the three rubber caps on the brew group.
Using a strong flat-blade screwdriver, adjust the three plastic slots underneath so that the “unlocked” position is indicated.
Note: with the newer version of the brew group, only one lever needs to be flipped.
Pull out the brew group. If it is stuck, pull firmly and evenly, but with feeling, preferably at the bottom right.
Work through the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
shingle is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
shingle
Author
with 1 other contributor
VauWeh
Member since: 10/19/2015
160,518 Reputation
211 Guides authored
Badges:
41
+38 more badges