Difficulty

Very easy

Steps

3

Time Required

                          10 minutes

Sections

1

  • Coffee outlet
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSiemens Surpresso Compact TK52001

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The replacement of the coffee outlet in the Titanium line TK56001 makes more trouble, because you have to open the casing. The guide can be found here.

What you need

Step 1

              Coffee outlet
  • To the left and right of the coffee outlet you will find two slots on the underside of the front cover.
  • Insert a spudger in the front edge of this slot and loosen the clips that fasten the front cover.
  • Pull the front cover forwards and off.

To the left and right of the coffee outlet you will find two slots on the underside of the front cover.

Insert a spudger in the front edge of this slot and loosen the clips that fasten the front cover.

Pull the front cover forwards and off.

1024

Step 2

  • The image shows the machine after the front cover has been taken off. The four slots where the clips were are easily recognizable.
  • The movable coffee outlet is surrounded by a casing. Place an opening tool in the gap that separates the two halves of the casing.
  • Slide the tool along the gap, until the front casing becomes loose.
  • Remove the front casing.

The image shows the machine after the front cover has been taken off. The four slots where the clips were are easily recognizable.

The movable coffee outlet is surrounded by a casing. Place an opening tool in the gap that separates the two halves of the casing.

Slide the tool along the gap, until the front casing becomes loose.

Remove the front casing.

Step 3

  • Remove the supply tube with a spudger from the connection. Pay attention to the outer wire spiral.
  • Remove the two Torx T15 screws.
  • Remove the black coffee spout.

Remove the supply tube with a spudger from the connection. Pay attention to the outer wire spiral.

Remove the two Torx T15 screws.

Remove the black coffee spout.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Annika Faelker

Minas Mayth

VauWeh

Author

                                      with 1 other contributor 


                    VauWeh

Member since: 10/19/2015

160,518 Reputation

                                      211 Guides authored                  



                       Badges:
                       41







                                                        +38 more badges