Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

1

  • Hanger
  • 6 steps

Flags

0

  • BackSkateboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hanger
  • Using the T-tool, unscrew the nut securing the wheel and remove it, setting it and the wheel aside.

Using the T-tool, unscrew the nut securing the wheel and remove it, setting it and the wheel aside.

1024

Step 2

  • Using the T-Tool, unscrew the Kingpin nut, washer and top bushing so that the hanger itself can be taken off.

Using the T-Tool, unscrew the Kingpin nut, washer and top bushing so that the hanger itself can be taken off.

Step 3

  • Pull straight up to remove the hanger. Remove the lower bushing and the lower cup washer just to check on the riser.

Pull straight up to remove the hanger. Remove the lower bushing and the lower cup washer just to check on the riser.

Step 4

  • To reassemble, take the lower cup washer, then the lower bushing and put it on the kingpin. Next, set the replacement hanger on top of the lower bushing.

To reassemble, take the lower cup washer, then the lower bushing and put it on the kingpin. Next, set the replacement hanger on top of the lower bushing.

Step 5

  • After the hanger is added, put the the top bushing, the top cup washer and then the Kingpin nut back.

After the hanger is added, put the the top bushing, the top cup washer and then the Kingpin nut back.

Step 6

  • After the kingpin nut is secured, take your T-Tool and add the wheels back onto and secure them in place.

After the kingpin nut is secured, take your T-Tool and add the wheels back onto and secure them in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Mark Stieber

Member since: 05/19/2020

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Advancing Technology, Team S1-G13, Beam Summer 2020                        

                                                  Member of University of Advancing Technology, Team S1-G13, Beam Summer 2020 



                    UAT-BEAM-SU20S1G13                     


                                            1 Member                     


                                            1 Guide authored