Skateboard Skateboard Trucks Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          15 - 25 minutes            

Sections

1

• Skateboard Trucks
• 4 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackSkateboard

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Skateboard Trucks               

• Insert bolt hardware through the factory drilled holes from the top side of the skateboard.
• If you have a riser and would like to install it, please reference the Wheel Bite Prevention guide.

Insert bolt hardware through the factory drilled holes from the top side of the skateboard.

If you have a riser and would like to install it, please reference the Wheel Bite Prevention guide.

1024

Step 2

• Slide the truck onto the four protruding bolt hardware screws, while using your hand to prevent the screws from popping out the top of the skateboard.

Slide the truck onto the four protruding bolt hardware screws, while using your hand to prevent the screws from popping out the top of the skateboard.

Step 3

• Hand tighten the nut hardware onto all four bolts.

Hand tighten the nut hardware onto all four bolts.

Step 4

• While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.
• Repeat steps 1 - 6 to install the second truck.

While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.

Repeat steps 1 - 6 to install the second truck.

To uninstall your trucks, simply follow these steps in reverse order. To continue assembling your skateboard deck, see the Wheel Installation guide.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Cameron Nye                     

Member since: 10/03/2012

79 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 6-32, Regan Fall 2012                        

                                                  Member of Cal Poly, Team 6-32, Regan Fall 2012 



                    CPSU-REGAN-F12S6G32                     


                                            5 Members                     


                                            6 Guides authored