Difficulty

Difficult

Steps

10

Time Required

                          30 minutes - 1 hour

Sections

3

  • Ear Cushion
  • 3 steps
  • USB Connector
  • 4 steps
  • Earpiece Speaker
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSkullcandy Crusher Wireless

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Follow this replacement guide if the earpiece speaker has stopped working and you’ve ruled out other sources of the problem (or maybe you just want to see the internal components of your Skullcandy Crusher Wireless). See our Troubleshooting page for more information on what could be causing the sound issues.

Also, for more information about soldering and desoldering, please use this guide.

What you need

Step 1

              Ear Cushion
  • Take your headphones and hold them upside down for better control with your hands.

Take your headphones and hold them upside down for better control with your hands.

1024

Step 2

  • Grab the ear cushion firmly between your thumb and forefinger with a tight grip.
  • Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

Grab the ear cushion firmly between your thumb and forefinger with a tight grip.

Pull the ear cushion away from the plastic, covering the speaker, by sliding the ear cushion down to release it.

Step 3

  • Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

Continue pulling it away from the edges of the plastic covering until the cushion is fully removed.

Step 4

              USB Connector
  • Remove three 12 mm Phillips #1 screws located underneath the left ear cushion.

Remove three 12 mm Phillips #1 screws located underneath the left ear cushion.

Step 5

  • Slide a plastic opening tool between the plastic frame and speaker assembly of the headphones.
  • Gently pry the speaker away from the frame of the headphones.

Slide a plastic opening tool between the plastic frame and speaker assembly of the headphones.

Gently pry the speaker away from the frame of the headphones.

Step 6

  • Separate the headphone speaker assembly from headphone speaker frame.

Separate the headphone speaker assembly from headphone speaker frame.

Step 7

  • Inspect the USB port and ensure that it is connected correctly. If necessary, desolder the USB port and replace it with the new port.
  • For more information on soldering, please, use this Solder and Desolder Connections guide.

Inspect the USB port and ensure that it is connected correctly. If necessary, desolder the USB port and replace it with the new port.

For more information on soldering, please, use this Solder and Desolder Connections guide.

Step 8

              Earpiece Speaker
  • Remove four 4 mm Phillips #1 screws that connect the motherboard with the plastic frame.

Remove four 4 mm Phillips #1 screws that connect the motherboard with the plastic frame.

Step 9

  • Remove three 4 mm Phillips #1 screws that connect the bass speaker to the plastic frame.

Remove three 4 mm Phillips #1 screws that connect the bass speaker to the plastic frame.

Step 10

  • Move the motherboard away from the plastic frame.
  • Desolder two cables to replace the speaker and bass component.
  • For more information on soldering, please, use this Solder and Desolder Connections guide.

Move the motherboard away from the plastic frame.

Desolder two cables to replace the speaker and bass component.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Val

Member since: 03/31/2022

876 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 1-33, Gurgel Spring 2022                        

                                                  Member of UMass Dartmouth, Team 1-33, Gurgel Spring 2022 



                    UMASSD-GURGEL-S22S1G33                     


                                            1 Member                     


                                            12 Guides authored