Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackSky 6.0Q

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use the #00 Phillips screwdriver to remove the two 3 mm screws at the bottom of the backplate.
  • Pry off the back plate with the spudger.

Use the #00 Phillips screwdriver to remove the two 3 mm screws at the bottom of the backplate.

Pry off the back plate with the spudger.

1024

Step 2

  • After removing back panel, remove all ten 3mm screws with the #00 Phillips screwdriver from the black plastic casing so it can be removed.

After removing back panel, remove all ten 3mm screws with the #00 Phillips screwdriver from the black plastic casing so it can be removed.

Step 3

  • Use the plastic opening tool to help pry up the plastic backing.
  • Once loose, remove the plastic backing to expose underlying electronic components.

Use the plastic opening tool to help pry up the plastic backing.

Once loose, remove the plastic backing to expose underlying electronic components.

Step 4

  • Disconnect the gold cord extending from the battery to the top electronic board.
  • Use the nylon spudger to help pry up the battery attachment.
  • To reattach the gold cord and battery attachment connection, gently press piece back in place.

Disconnect the gold cord extending from the battery to the top electronic board.

Use the nylon spudger to help pry up the battery attachment.

To reattach the gold cord and battery attachment connection, gently press piece back in place.

Step 5

  • Use the nylon spudger to get underneath the battery and separate it from the phone back.
  • There is a white, milky adhesive so be careful to not rip or puncture the battery during removal.

Use the nylon spudger to get underneath the battery and separate it from the phone back.

There is a white, milky adhesive so be careful to not rip or puncture the battery during removal.

Step 6

  • Once separated, remove battery and replace with a new battery.

Once separated, remove battery and replace with a new battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Monica Difato

Member since: 11/06/2018

429 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       IUPUI, Team S1-G3, Hovde Fall 2018                        

                                                  Member of IUPUI, Team S1-G3, Hovde Fall 2018 



                    IUPUI-HOVDE-F18S1G3                     


                                            3 Members                     


                                            8 Guides authored