Sky 6 0Q Front Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Front Camera
4 steps

Flags

BackSky 6.0Q
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Camera

Use the #00 Phillips screwdriver to remove the two 3 mm screws at the bottom of the backplate.
Pry off the back plate with the spudger.

Use the #00 Phillips screwdriver to remove the two 3 mm screws at the bottom of the backplate.

Pry off the back plate with the spudger.

1024

Step 2

After removing back panel, remove all ten 3mm screws with the #00 Phillips screwdriver from the black plastic casing so it can be removed.

After removing back panel, remove all ten 3mm screws with the #00 Phillips screwdriver from the black plastic casing so it can be removed.

Step 3

Use the plastic opening tool to help pry up the plastic backing.
Once loose, remove the plastic backing to expose underlying electronic components.

Use the plastic opening tool to help pry up the plastic backing.

Once loose, remove the plastic backing to expose underlying electronic components.

Step 4

Disconnect the electronic adapter connecting the camera to the top mother board.
Once disconnected, remove the camera and replace with new camera. If necessary, use the spudger to help remove the camera.
To reattach front camera electrical connection, gently press piece back in place.

Disconnect the electronic adapter connecting the camera to the top mother board.

Once disconnected, remove the camera and replace with new camera. If necessary, use the spudger to help remove the camera.

To reattach front camera electrical connection, gently press piece back in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Robert Berardi

Member since: 11/06/2018

247 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S1-G3, Hovde Fall 2018                        

                                                  Member of IUPUI, Team S1-G3, Hovde Fall 2018 



                    IUPUI-HOVDE-F18S1G3                     


                                            3 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team