Sky Thunder Hd 8500Wh Lower And Upper Body Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

3

• Rotor Blade
• 1 step
• Lockstitch
• 1 step
• Lower and Upper Body
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSky Thunder HD 8500WH

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Rotor Blade               

• Place the drone with the top side facing up.
• Remove the blade cover.
• Remove the rotor blade.

Place the drone with the top side facing up.

Remove the blade cover.

Remove the rotor blade.

1024

Step 2

              Lockstitch               

• Unscrew the 1cm screw holding in the blade lockstitch with the Phillips 0 Screwdriver.
• Remove the blade lockstitch.

Unscrew the 1cm screw holding in the blade lockstitch with the Phillips 0 Screwdriver.

Remove the blade lockstitch.

Step 3

              Lower and Upper Body               

• Lay down the drone so the battery side is facing up.
• Unscrew all 5 .8cm screws on each arm of the drone with the Phillips 0 Screwdriver.
• Repeat previous bullet for each arm (20 screws in total).

Lay down the drone so the battery side is facing up.

Unscrew all 5 .8cm screws on each arm of the drone with the Phillips 0 Screwdriver.

Repeat previous bullet for each arm (20 screws in total).

Step 4

• Using a bit of force, gently pull apart the lower and upper bodies.
• Keep going until both parts are completely separated.

Using a bit of force, gently pull apart the lower and upper bodies.

Keep going until both parts are completely separated.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Nicholas Jones                     

Member since: 09/25/2017

648 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       University of North Texas, Team S2-G7, Thompson Fall 2017                        

                                                  Member of University of North Texas, Team S2-G7, Thompson Fall 2017 



                    UNT-THOMPSON-F17S2G7                     


                                            3 Members                     


                                            5 Guides authored