Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

2

  • Rear Case
  • 4 steps
  • Speakers
  • 3 steps

Flags

0

  • BackSKYTEX SP1020

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Prior to any repairs make sure that you are familiar with the device as well as the location of its buttons and ports.
  • Turn off device prior to continuing to further steps.

Prior to any repairs make sure that you are familiar with the device as well as the location of its buttons and ports.

Turn off device prior to continuing to further steps.

1024

Step 2

  • Set the tablet back panel facing down, with the SKYTEX logo facing you. You will find that this step will start from the right side of the device.
  • Insert the plastic opening tool between the bottom seam of the back panel and the micro SD port. The tool’s edge should point toward the rear panel to prevent any scratching or damage.
  • Follow up with the plastic opening tool, releasing the clips as you go all the way around the device.

Set the tablet back panel facing down, with the SKYTEX logo facing you. You will find that this step will start from the right side of the device.

Insert the plastic opening tool between the bottom seam of the back panel and the micro SD port. The tool’s edge should point toward the rear panel to prevent any scratching or damage.

Follow up with the plastic opening tool, releasing the clips as you go all the way around the device.

Step 3

  • The clips will be released in the order specified as the spudger tool is moved along the seam around the device.

The clips will be released in the order specified as the spudger tool is moved along the seam around the device.

Step 4

  • Use a plastic opening tool to pry the speakers out of the rear case.
  • The rear case will now be free from the rest of the device.

Use a plastic opening tool to pry the speakers out of the rear case.

The rear case will now be free from the rest of the device.

Step 5

              Speakers
  • locate the speakers

locate the speakers

Step 6

  • Use a soldering iron and desoldering braid to desolder the two sets of red and black wires.

Use a soldering iron and desoldering braid to desolder the two sets of red and black wires.

Step 7

  • Use a plastic opening tool to pry the speakers out of the rear case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Anthony Vitali

Member since: 03/23/2015

293 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 1-6, Miles Spring 2015                        

                                                  Member of UMass Dartmouth, Team 1-6, Miles Spring 2015 



                    UMASSD-MILES-S15S1G6                     


                                            4 Members                     


                                            8 Guides authored