Difficulty

Moderate

Steps

7

Time Required

                          20 - 30 minutes

Sections

2

  • Case
  • 4 steps
  • Screen
  • 3 steps

Flags

0

  • BackSkytex SP728

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Make sure the device is powered off
  • Rotate the device so the ports and screws face you

Make sure the device is powered off

Rotate the device so the ports and screws face you

1024

Step 2

  • Using a small phillips screwdriver, unscrew both end screws

Using a small phillips screwdriver, unscrew both end screws

Step 3

  • Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

Using a plastic opening tool, work your way around the edge of the device, separating the case from the rest of the device

Step 4

  • Once the case has been loosened, pry the backing off gently with your hands.
  • Make sure to remove the case gently as extra force can break the clasps or the case itself.

Once the case has been loosened, pry the backing off gently with your hands.

Make sure to remove the case gently as extra force can break the clasps or the case itself.

Step 5

              Screen
  • Follow the Case Replacement to separate the tablet from its backing
  • Using a small Phillips screw driver, unscrew all screws connecting circuit board to device
  • Remove all tape connecting battery and circuit board to front case
  • Detach all connector strips from the circuit board

Follow the Case Replacement to separate the tablet from its backing

Using a small Phillips screw driver, unscrew all screws connecting circuit board to device

Remove all tape connecting battery and circuit board to front case

Detach all connector strips from the circuit board

Step 6

  • Using the plastic opening tool, begin separating the front screen from the display

Using the plastic opening tool, begin separating the front screen from the display

Step 7

  • Once screen has been separated, use tweezers to remove front camera

Once screen has been separated, use tweezers to remove front camera

To reassemble your device with a new screen, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Michelle Strickland

Member since: 01/21/2015

280 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 5-1, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-1, Brown Winter 2015 



                    USFT-BROWN-W15S5G1                     


                                            4 Members                     


                                            11 Guides authored