Difficulty

Easy

Steps

4

Time Required

                          5 - 8 minutes

Sections

1

  • Battery
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSleepTracker Elite

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • You will need:
  • CR 2032 Battery
  • Philips #0 screwdriver
  • Something to pop the battery out, like a thin spudger, or a #2 slot screwdriver.

You will need:

CR 2032 Battery

Philips #0 screwdriver

Something to pop the battery out, like a thin spudger, or a #2 slot screwdriver.

1024

Step 2

  • Remove these four screws. They’re all the same size.

Remove these four screws. They’re all the same size.

Step 3

  • Lift off the case back.
  • Underneath, you’ll see a sheet of plastic film. It should be possible to remove the battery without removing the film, if you’re careful, but I didn’t want to risk bending or tearing the plastic.
  • If you do take the plastic off, beware of maneuvering it over the three springs in the upper left, and the small prong that sticks out over the battery. You’ll need to be sure to arrange the plastic carefully over these obstructions when re-assembling.

Lift off the case back.

Underneath, you’ll see a sheet of plastic film. It should be possible to remove the battery without removing the film, if you’re careful, but I didn’t want to risk bending or tearing the plastic.

If you do take the plastic off, beware of maneuvering it over the three springs in the upper left, and the small prong that sticks out over the battery. You’ll need to be sure to arrange the plastic carefully over these obstructions when re-assembling.

Step 4

  • Insert spudger or flat screwdriver in the notch indicated by the arrow, and lever out the battery.
  • The new battery should insert the same way the old one came out, and snap into place.

Insert spudger or flat screwdriver in the notch indicated by the arrow, and lever out the battery.

The new battery should insert the same way the old one came out, and snap into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    Mark Boszko

Member since: 02/02/2012

131 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge