Difficulty
Easy
Steps
6
Time Required
5 - 10 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackWatch
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Take apart the steel strap for the watch by using the round head (SIM) screwdriver. Then pull out the screw.
Take apart the steel strap for the watch by using the round head (SIM) screwdriver. Then pull out the screw.
1024
Step 2
- Remove four screws from the back cover using the Y000 screwdriver .
Remove four screws from the back cover using the Y000 screwdriver .
Step 3
- Remove the back cover of the watch using the opening tool.
Remove the back cover of the watch using the opening tool.
Step 4
- Remove the plastic gasket from on top of the battery using the opening tool.
Remove the plastic gasket from on top of the battery using the opening tool.
Step 5
- Loosen the battery bracket from the watch by placing the 1mm flathead screwdriver under and lifting carefully.
Loosen the battery bracket from the watch by placing the 1mm flathead screwdriver under and lifting carefully.
Step 6
- Take the old battery out using the plastic opening tool or spudger.
Take the old battery out using the plastic opening tool or spudger.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Aziz Zabarmawi
Member since: 10/07/2019
133 Reputation
1 Guide authored
Badges:
2
Team
Eastern Washington University, Team S2-G6, Munoz Fall 2019
Member of Eastern Washington University, Team S2-G6, Munoz Fall 2019
EWU-MUNOZ-F19S2G6
5 Members
1 Guide authored
