Difficulty

Easy

Steps

3

Time Required

                          10 - 20 minutes

Sections

1

  • Screen
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSmart Tweezers LCR-meter

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Opening the device
  • Start by removing the 4 screws in the back of the device using a size 00 Philips screw driver.

Start by removing the 4 screws in the back of the device using a size 00 Philips screw driver.

1024

Step 2

              Replacing the screen
  • Gently open the zif connector that holds the screen.
  • Insert the replacement screen, and close the zif

Gently open the zif connector that holds the screen.

Insert the replacement screen, and close the zif

Step 3

              Closing the device
  • When closing the housing, make sure the screen fits into the rectangle on the top.
  • If the screen is not in this rectangle, it may become damaged when the screws are tightened
  • Hold the screen in place from below; line up the button’s edge of the top housing to line up with the bottom housing. Slide your finger out as you bring the top and bottom housings to meet.
  • Replace the 4 Philips screws in the back.

When closing the housing, make sure the screen fits into the rectangle on the top.

If the screen is not in this rectangle, it may become damaged when the screws are tightened

Hold the screen in place from below; line up the button’s edge of the top housing to line up with the bottom housing. Slide your finger out as you bring the top and bottom housings to meet.

Replace the 4 Philips screws in the back.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    brittany

Member since: 07/16/2012

234 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges