Difficulty

Moderate

Steps

7

Time Required

                          1 hour

Sections

1

  • Charging Port
  • 7 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackSmartab STJR700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Charging Port
  • Power off the device by holding down the lock button. Remove the case from the tablet and place it face down.

Power off the device by holding down the lock button. Remove the case from the tablet and place it face down.

1024

Step 2

  • Unscrew all four corner screws using the PH000 screwdriver head found in the iFixit kit.

Unscrew all four corner screws using the PH000 screwdriver head found in the iFixit kit.

Step 3

  • CAUTION: Avoid touching the display.
  • Pry open the tablet using a metal spudger. Set aside the back panel.

CAUTION: Avoid touching the display.

Pry open the tablet using a metal spudger. Set aside the back panel.

Step 4

  • Locate the charging port.

Locate the charging port.

Step 5

  • Unscrew all the labeled screws using the PH000 screwdriver head.

Unscrew all the labeled screws using the PH000 screwdriver head.

Step 6

  • Remove all pieces of tape using the tweezers provided in the iFixit kit.
  • Remove the two ribbon cables affixed to the camera.

Remove all pieces of tape using the tweezers provided in the iFixit kit.

Remove the two ribbon cables affixed to the camera.

Step 7

  • Remove the motherboard component from the screen and display.
  • Because the charging port is soldered onto the motherboard, the motherboard must be replaced by one specifically made for the Smartab STJR700.

Remove the motherboard component from the screen and display.

Because the charging port is soldered onto the motherboard, the motherboard must be replaced by one specifically made for the Smartab STJR700.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Thi Le

Member since: 03/08/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S3-G4, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S3-G4, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S3G4                     


                                            4 Members                     


                                            5 Guides authored