Difficulty

Easy

Steps

4

Time Required

                          10 minutes

Sections

1

  • Binding
  • 4 steps

Flags

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackSnowboard

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Binding
  • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.
  • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner’s manual.

Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner’s manual.

1024

Step 2

  • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.
  • The highback plate is the vertical support plate located on the heel side of the binding.

Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

The highback plate is the vertical support plate located on the heel side of the binding.

Step 3

  • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

Step 4

  • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.
  • Lift or slide the binding off the board and set the screws aside.

Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

Lift or slide the binding off the board and set the screws aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Loren Sunding

Member since: 01/14/2014

118 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 17-4, Forte Winter 2014                        

                                                  Member of Cal Poly, Team 17-4, Forte Winter 2014 



                    CPSU-FORTE-W14S17G4                     


                                            5 Members                     


                                            7 Guides authored